In Episode 4 of “Ask Danny,” I’m chatting with my longtime mate and drywall pro Mark Rutherford — “The Drywall Expert.”
About Mark Rutherford
Mark Rutherford has worked with drywall on new construction and reworking projects for 40 decades.
I initially achieved Mark in 2007 though performing on a activity room addition for an episode of Today’s Property owner Television set.
He at present lives in southwest Pennsylvania.
Drywall Nail Pops
Why does a nail pop happen, and what’s the greatest way to suitable it?
Mark: Nail pops occur when a nail or screw arrives free beneath drywall and generates a bulge or “pop” in the wall.
They typically transpire with new construction inside of the 1st year. That’s mainly because everything is drying out and settling — the house is genuinely “finding alone.” I constantly say it is type of like a living human being.
Nail pops are frequent close to stairways because the frequent stepping movement loosens up the nails.
To restore a nail pop, initial faucet it with a hammer. If it feels spongy, that indicates the installer missed the stud. Pull it out, and generate a drywall screw into the stud or joist in close proximity to the hole, with the head of the screw just down below the surface.
If you simply cannot extract the free nail, tap in a different drywall nail ideal beside it so the head of that nail catches the present nail. This keeps the nail from popping back out all over again.
If a screw is leading to the pop, use a screwdriver to drive it in deep so it’s flush with the wall’s area.
After the nail or screw is underneath the drywall surface, use the back again of a drywall knife to flush the drywall paper with the area, and then deal with it with a coat of drywall mud.
Let the mud dry for 24 hours, then apply an additional coat. Soon after the second coat dries, sand it and use a shop vac as you work to suck up any dust.
Suggestion: Maintain your nail pop repair location as small as possible — the much less mud you use, the considerably less sanding you’ll require to do.
How do you correct drywall puckering?
Mark: Drinking water problems is the most widespread lead to of drywall pucker, but incorrect installation can also bring about it. In some scenarios, the installer did not leave ample mud left powering or didn’t use any in that spot.
For big drywall puckering, remove the tape to patch and fix. Lay down mesh tape and use a fresh new coat of drywall mud.
For slight puckering, use the corner of a drywall knife to lift the free tape and use a slim layer of all-purpose mud less than the tape. Sleek the tape out and place a light-weight coat of drywall mud more than the edge of the tape.
For popcorn ceilings, use the very same method, but be additional careful to not destruction the texture.
If it’s a important crack or older ceiling, the popcorn ceiling texture will come off. In that scenario, you’ll want to apply a coat of sprayed acoustic texture.
You can purchase this content in a can, but it can be tricky to apply. Comply with the directions and exercise on a piece of cardboard initially.
If you can’t match the texture, get in touch with a professional.
What are some tips to lessen dust when sanding drywall?
Mark: To lower the mess even though sanding drywall, I generally develop an oxygen tent.
Working with 2-inch extensive masking tape, I encase the area with plastic. I start out taping at the ceiling, then provide it down the wall and to the ground. All the things is connected.
Then, I make a doorway underneath to crawl into. Once I’m completed sanding, I enable the dust settle, dust myself off and crawl out the door.
Normally turn off your HVAC program when sanding drywall. When the vents appear on, the plastic and dust will blow all over, and the dust will operate its way into your procedure.
Last but not least, usually dress in a superior mask when you are sanding.
A Drywall Disaster
Some careers you don’t have to believe 2 times about turning down.
A single time, a builder approached Mark at a work web page and requested him to search at a different household in the subdivision.
No large deal, suitable? Well, incorrect. The complete house was hung with items of scrap drywall. Turns out, the property owners experienced been accumulating the drywall from the dumpsters in the subdivision to develop the household. It did not matter if the drywall was a corner piece or angled, or even wet and harmed.
“When I walked into that property, it appeared like a 2,000-piece jigsaw puzzle,” Mark claimed.
The major piece of drywall in the home was most likely about 2×4 ft, and in some places, there were being gaps as major as an inch vast in sites.
“That was a big no from me,” Mark stated.
Mark’s Drywall Suggestions
- If you are functioning in close proximity to cupboards or baseboards, set tape/plastic down to secure people areas.
- Make certain you are using the right drywall mud. Go with a environmentally friendly lid or black lid bucket. Use an all-goal mud and study the bucket. A single variety of mud may well be superior for coating but not for taping.
- Be individual and function in levels. Enable the mud dry then incorporate supplemental coats.
- If you’re wondering about reworking your dwelling, test hanging the drywall you. You don’t know what you simply cannot do until eventually you check out.
More Reading through
Question a Concern! (Podcast)
Talk to a dilemma and we could response it on the “Present-day Property owner Podcast!” We also could use it on our nationally syndicated radio broadcast or on todayshomeowner.com.